Introduction My Builder's Log My Flight Log Tips List of Builders Gallery Ideas for Paint Links News




I floxed a threaded plate under the gear barring block (1) then bolted a pad to the under side of the wing (2). I then removed the screw and nut from an old C clamp and pressed it into a telescoping AL pipe that threads into the wing pad (3).













Home | Introduction | My Builder's Log | My Flight Log | Tips | Legacy Builders | Legacy Gallery | Ideas For Paint | Links | Legacy News

Copyright © 2005. All rights reserved. This site is the builder's log of Don Barnes and for the purpose of sharing information and opinions related to building a Lancair Legacy. Any person using these images, ideas and tips does so at their own discretion and risk. No responsibility is expressed or implied and is without recourse against anyone related to this site. This site is not affiliated with Lancair International or Neico Aviation Inc., however, we love their aircraft.

Design by Cellar Ideas and produced with GoLive CS. Hosting generously provided by Rob Logan